Store

Asiga PlasGRAY V2 1 liter

SKU PGRY-1L
$175.00
On Sale
was $185.00
Save 5%
12 available
1
Product Details
Suitable for:
  • Enclosures
  • Jigs and Fixtures
  • LTV - VLT (Low Temperature Vulcanized Molds) when pre-dipped in React-Shun molding and casting barrier
  • RTV (Room Temperature Molds)
  • Mechanical Assemblies
  • Concept Models

PlasGRAY is a great material for many things:

Photo Polymer for use in Asiga 3D printing systems with the 405nm wavelength emitter.

Asiga manufactures general modeling photopolymers for the Asiga series of machines.

  • Note: We do not sell material "packs". There is no trays included. Purchase trays in "Consumables" section of shop. By selling in this way, we save you money.

General purpose gray material.

Code: MT-MF-08-00-2

Dimensions: 22.0 x 21.5 x 7.0 cm

PlasGRAY is a high resolution photopolymer suitable for a wide range of applications.

With strong PP/ABS-like properties, PlasGRAY is a gray colored material with great durability. It can be directly molded in RTV or low-temperature vulcanized rubber. If making vulcanized molds, you must dip the RP parts in our React-Shun nanoparticle release material so that it is easily removed from the cut mold. Because of the properties of the low temperature silicone rubber materials, it's not a bad idea to coat the mold frames and plates with React-Shun as well.


Resins are non-returnable.

MECHANICAL PROPERTIES

Color

Gray

Tensile Strength

51.1 Mpa

Elongation at Break

6.58 %

Elongation at Yield

8.40%

Flexural Strength

86.8 MPa

Flexural Modulus

1910 MPa

Hardness (Shore D)

82 Shore D

Viscosity

343 mPa s

Glass Transition Temperature

84°C

Izod Impact-Notched

4.97 kJ/m²

Density

1.181 g/cm³

Save this product for later
Share this product with your friends
Asiga PlasGRAY V2 1 liter