ECO IPA Recovery System

ECO IPA Recovery System

This is the IPA recovery system that the 3D Printing industry has needed for a long time. This is a money making machine that also protects the environment.

How much are you spending on fresh IPA every month? How are you disposing of the dirty contaminated material that you have used? I hope you are not putting it down the drain.

That could really cost you a lot of money when you get caught. Why constantly buy and dispose of more and more IPA when you can recycle it.

The solids from the process will remain in the boiler bag in the machine until the machine lets you know the cycle is finished. The small quantity of solids that remain can then be disposed of properly and in many cases no hazard costs. All of us doing large volumes of 3D Printing need this.

Of course you do not want to run this machine in areas of open flame because it will be dispensing recovered 95 – 97% pure IPA back into your container. There are cheap units out there that look similar but they are used for paint and automotive solvents but they are not designed to safely handle flammables like alcohol. Take it from an old novice moonshiner from the mountains of East Tennessee when I tell you that you cannot be too safe when distilling alcohol.

This unit is a UL approved, flammable solvent recovery system and poses no danger to operate inside your 3D printing lab if you just follow proper procedures that come with the machine. During the recovery process, this machine does not emit the VOC fumes resins because of the refrigerated and well engineered design.